iVocaloid论坛

标题: Vocaloid4FE 4.0.1 [打印本页]

作者: AlexVox    时间: 2015/1/3 02:45     标题: Vocaloid4FE 4.0.1

本帖最后由 AlexVox 于 2015/1/17 19:12 编辑

The new engine allows the importation of Vocaloid 2 and Vocaloid 3 vocals, though Vocaloid 2 vocals must have already been imported into Vocaloid 3 for this to work. The new engine includes other features, but not all of them are accessible by Vocaloid 2 and Vocaloid 3 vocals. One of the new features is a "Growl" feature which allows vocals built for Vocaloid 4 to take on a growl-like property in their singing results. Cross-synthesis was also added, allowing the user to switch between two of a character's vocals built for the same language smoothly using a time-varying parameter. This feature is accessible by Vocaloid 3 and Vocaloid 4 vocals, but not Vocaloid 2. Another feature included is Pitch Rendering, which all imported vocals can use. This displays the effective pitch curve on the user interface. Finally, real-time input has been included in this version and is another feature which all vocals can use. VSQX files made for Vocaloid 3 work in Vocaloid 4

*supported language interfaces: english, japanese, korean, spanish, chinese, italian, french, russian, portuguese(Brasil), tagalog (philipino), vietnamese, Indonesian, malaysian.

*over 100 job-plugins from Vocaloidstore and some user-made plugins, you can find them in Vocaloid\Job Plugins folder after installation

don't forget to read readme.txt for other information

https://mega.co.nz/#!4sFCkS7b!9DevgQgdJgOjgbXHlkIDPVde6Ji4ol2z-rdqy7wUxZs
https://www.oboom.com/QQC6MFTA



作者: AlexVox    时间: 2015/1/3 02:48

where is Vocaloid4 section on this forum?
作者: mingqimoon    时间: 2015/1/3 08:15

Thank you for sharingXD
作者: dur    时间: 2015/1/3 10:27

wow!!!so~~fast! I can`t help trying it!thx!
作者: bleach50712    时间: 2015/1/3 11:01

It can't run on Win XP QAQ
作者: 兽子君    时间: 2015/1/3 11:19

thanks!
但是我是xp啊qwq....
作者: 脑残蓝    时间: 2015/1/3 11:24

http://yunpan.cn/cydCisbEL83bS  提取码 cbcc
作者: Wayz琳    时间: 2015/1/3 11:52

thank!!

作者: hqy123    时间: 2015/1/3 12:06

脑残蓝 发表于 2015/1/3 11:24
http://yunpan.cn/cydCisbEL83bS  提取码 cbcc

下了三遍,VOCALOID4.exe装不上去
作者: jackedzzz    时间: 2015/1/3 12:14

gee!!! thank for sharing dude!!!i cant wait for download it
作者: 淑蝶    时间: 2015/1/3 12:18

thank you wwwwwwwwwwww little angel
作者: 镜丿小裂    时间: 2015/1/3 12:59

Thank you very much!!Happy new year!!
作者: 脑残蓝    时间: 2015/1/3 13:10

hqy123 发表于 2015/1/3 12:06
下了三遍,VOCALOID4.exe装不上去

我知道,我安装的时候也这样。然后我把它覆盖安装到V3目录下就可以了。
作者: tytyy123k    时间: 2015/1/3 16:02

Oh think you!!!!!!
you are my god!!!!!!
作者: AlexVox    时间: 2015/1/3 16:38

本帖最后由 AlexVox 于 2015/1/3 13:45 编辑
bleach50712 发表于 2015/1/3 07:01
It can't run on Win XP QAQ

V4 is not compatible with XP\Vista
http://www.vocaloid.com/vocaloid4/

btw, i tried to fix that issue, V4 can run on Xp but works bery unstable, probably V4 using some W7 winapi functions or something like that, that's why yamaha locked it for old OS's, or maybe it's because V4 programmed with visual c++ 2012 (while the V3 programmed with vcc 2008)

作者: Raicex    时间: 2015/1/3 19:44

It can't work on Win8, either.
Something are seen Troy.
作者: AlexVox    时间: 2015/1/3 20:00

本帖最后由 AlexVox 于 2015/1/3 16:04 编辑
Raicex 发表于 2015/1/3 15:44
It can't work on Win8, either.
Something are seen Troy.

not true, it works with Win8 just fine, many ppl already use it on Win8 and everything is ok
it might be specific issue on your PC, put screenshot here
and don't forget that some antiviruses don't like packed executables, so they have "false alarm" on them and deleting exe-file (more likely - avast), most of antivruses have no false alarm on it
in such case: turn antivirus off, install V4, add exe-file to exception list of antivirus and turn it on

作者: Raicex    时间: 2015/1/3 20:10

here you are.

图片附件: 888.png (2015/1/3 20:09, 252.79 KB) / 下载次数 3
http://bbs.ivocaloid.com/forum.php?mod=attachment&aid=NzYzMTN8ZTYzODNlMzN8MTc0OTU2NzE5MXwwfDA%3D


作者: AlexVox    时间: 2015/1/3 20:16

本帖最后由 AlexVox 于 2015/1/3 16:38 编辑
Raicex 发表于 2015/1/3 16:10
here you are.

yep, same shit for MacAfee, but McAfee even more agressive than avast and claiming almost everything as virus, shitty antiviruses have no large antivirus base and no "harmless packer" list, so they just using stupid method: packed -> suspicious -> virus
google Artemis, it should change you default browser page if it's virus, MacAfee don't know shit LOL
btw, Pocaloid2.exe results - https://www.virustotal.com/en/fi ... bb6fe68d9/analysis/
Artemis again, though packers are different, stupid maccafee, for real

i recommend to use Eset Smart Security (NOD32)
作者: Maczly    时间: 2015/1/3 20:30

thank!you are fast~hoho
作者: minadukirei    时间: 2015/1/3 20:52

Thanks!!
作者: 1024685056    时间: 2015/1/3 21:24

啊啊卧槽~原本的十参变成了十二个参数啊~~
新增加的1.XSY:Cross-Synthesis(P.S.估计是类似于声库交火,不过不会用)
新增加的2.GWL:Growl(P.S.估计和英语意思一样,吼声)
发现一个新功能:Pitch Rendering(P.S.类似于UTAU的音高线吧。。。)
下面参数设定不像V3那样直接点了,而是选,上面的Edit就是你要设定的参数,下面的Back就是背景的参数。。。
嘛,暂时就发现这些新的变化,欢迎补充~
作者: AlexVox    时间: 2015/1/3 21:30

1024685056 发表于 2015/1/3 17:24
啊啊卧槽~原本的十参变成了十二个参数啊~~
新增加的1.XSY:Cross-Synthesis(P.S.估计是类似于声库交火,不过 ...

new features described on official website
http://www.vocaloid.com/vocaloid4/
(real-time recording only for cubase version)

cross synth available for these vocaloids
http://www.vocaloid.com/application/function/cross_s.html
作者: yzhemail    时间: 2015/1/3 22:49

不知道有没有兴趣破解一下MAC版的音源库呢?O(∩_∩)O~
作者: AlexVox    时间: 2015/1/4 04:00

本帖最后由 AlexVox 于 2015/1/4 18:15 编辑
Raicex 发表于 2015/1/3 16:10
here you are.

specially for you: download this exe
https://yadi.sk/d/dMn45t7Mdn9Vi
and copy to Vocaloid4FE folder, McAfee and Avast false-alarms are fixed
作者: lazydog    时间: 2015/1/4 12:26

Thank you for cracking V4 again.
BTW,could you please unlock "growl" feature?I remember that some producter used "growl" to make their songs again,but they used V3 library!I don't think YAMAHA gave them the new version of library.
作者: aasa    时间: 2015/1/4 13:05

Thanks.But can you tell me why the cross synth can't work for many other V3 library?
作者: AlexVox    时间: 2015/1/4 15:09

aasa 发表于 2015/1/4 09:05
Thanks.But can you tell me why the cross synth can't work for many other V3 library?

cross synth works only between appends of same voice
http://www.vocaloid.com/application/function/cross_s.html
it's Yamaha's liimitation
作者: AlexVox    时间: 2015/1/4 15:11

本帖最后由 AlexVox 于 2015/1/4 11:14 编辑
lazydog 发表于 2015/1/4 08:26
Thank you for cracking V4 again.
BTW,could you please unlock "growl" feature?I remember that some pr ...

growl feature supported only by V4-vocaloids, because growl needs ADDITIONAL voice data from library, and only V4-libraries have it, so it's impossible to unlock it for V3's
growl with V3's can be used with some VST-plugins, not with native feature of V4-editor

作者: Raicex    时间: 2015/1/4 16:09

AlexVox 发表于 2015/1/4 04:00
specially for you: download this exe
https://yadi.sk/d/ed3QfwOOdmVrQ
or https://mega.co.nz/#!RhlAw ...

Thanks very much.
作者: 雪栀    时间: 2015/1/4 17:34

thank you very much。It is Very beautiful~~
win8.1~飘过~~~~~华丽丽....
作者: aasa    时间: 2015/1/4 18:18

AlexVox 发表于 2015/1/4 15:09
cross synth works only between appends of same voice
http://www.vocaloid.com/application/function/ ...

Thank you very much
作者: AlexVox    时间: 2015/1/6 03:30

本帖最后由 AlexVox 于 2015/1/17 19:10 编辑

some updates on installer:
few language interface translations updated (chinese too)
fixed issue: pdf-manual didn't show up while opening via Vocaloid4-editor
fixed issue: deleting X-SYNTH data for V4-vocaloids during re-installation of editor
added quite installation for both: "Visual C++ 2008 SP1 (x86)" and "Visual C++ 2012 (x86)" while installing editor
added shortcut to pdf-manual into W-Programms-Vocaloid4FE section
avast false alarm fixed during installation process

https://mega.co.nz/#!4sFCkS7b!9DevgQgdJgOjgbXHlkIDPVde6Ji4ol2z-rdqy7wUxZs
https://www.oboom.com/QQC6MFTA

作者: qqopp123    时间: 2015/1/6 19:48

I knew you'd break.. Thank you
作者: meimeixue    时间: 2015/1/7 19:40

Can it run on xp after updates?
作者: AlexVox    时间: 2015/1/7 19:43

meimeixue 发表于 2015/1/7 15:40
Can it run on xp after updates?

no, Vocaloid4 works only with Win7 or 8
http://www.vocaloid.com/vocaloid4/

if you have Xp\Vista - use V3FE 3.2.1.0
作者: qqopp123    时间: 2015/1/7 20:39

Vocaloid3 source how to import the vocaloid4 need not to need to get some what?
作者: AlexVox    时间: 2015/1/7 21:01

qqopp123 发表于 2015/1/7 16:39
Vocaloid3 source how to import the vocaloid4 need not to need to get some what?

V4FE have support for old V3FE/AE -packages, just install and use them
作者: qqopp123    时间: 2015/1/10 16:42

本帖最后由 qqopp123 于 2015/1/10 16:55 编辑

After installing the could not start because the DLL files of the dynamic link library what problem...... This can be solved?
well...

b03099529822720e42a1fa5278cb0a46f31fab76.jpg


The beginning is the deletion of msvcr110.dll, I went online to find the file on the c:/windows/system32, and then the......


[attach]76345[/attach]

Try the online said registered with the Regsvr32, is this......

2c0dd8c8a786c917b5f84a91ca3d70cf39c757e2.jpg



Http://tieba.baidu.com/p/3511280526 then this post....



图片附件: b03099529822720e42a1fa5278cb0a46f31fab76.jpg (2015/1/10 16:53, 13.96 KB) / 下载次数 2
http://bbs.ivocaloid.com/forum.php?mod=attachment&aid=NzYzNDh8ZmVhMDU3YmF8MTc0OTU2NzE5MXwwfDA%3D



图片附件: b03099529822720e42a1fa5278cb0a46f31fab76.jpg (2015/1/10 16:52, 13.96 KB) / 下载次数 1
http://bbs.ivocaloid.com/forum.php?mod=attachment&aid=NzYzNDd8OWVkZTUzYWJ8MTc0OTU2NzE5MXwwfDA%3D



图片附件: 2c0dd8c8a786c917b5f84a91ca3d70cf39c757e2.jpg (2015/1/10 16:51, 15.87 KB) / 下载次数 2
http://bbs.ivocaloid.com/forum.php?mod=attachment&aid=NzYzNDZ8OGZkODBlZDV8MTc0OTU2NzE5MXwwfDA%3D


作者: AlexVox    时间: 2015/1/10 17:43

本帖最后由 AlexVox 于 2015/1/10 15:09 编辑
qqopp123 发表于 2015/1/10 12:42
After installing the could not start because the DLL files of the dynamic link library what problem. ...

you have to install update for your Windows: VCC+ 2012 (x86) update 4, choose english version and then x86-version
http://www.microsoft.com/en-US/download/details.aspx?id=30679
also you can find that package in folder where you have Vocaloid4FE installed (file vcredist_x86.exe) and launch it

also to good to find ultimate packs for all VCC's x86 (includes 2008, 2010,2012,2013)

V4 works with VCC+ 2012 update 4 (microsoft-link above), i have notebook with only VCC+ 2012 update 4 installed and V4 works fine (original or FE, no matter, they using same VCC DLL's)

also VCC+ 2008 SP1 needed for some components like Vocalistener, Vocaloid.NET, etc (though V4 can run without vcc 2008)

you if still have problems: uninstall Editor and ALL VCC+ 2012-components from your PC, make restart, then install VCC+ 2012 x86 and VCC+ 2008 SP1 x86, then install Editor. Same problems sometimes happens with V3 too, just with another message ("The application has failed to start because its side-by-side configuration is incorrect. Please see the application event log or use the command-line sxstrace.exe tool for more detail.")

different versions of "VCC+ 2012" can interfere with each other, so it's better to have only one VCC+ 2012_x86 being installed
http://www.microsoft.com/en-US/download/details.aspx?id=30679

if you have few "VCC+ 2012" or few "VCC+ 2008" into your system - it could be the problem for some applications, you better to leave one VCC+ 2012 and one VCC+ 2008 in your system

also it could be the problem with windows component regsvr32
http://support.microsoft.com/kb/249873/zh-cn http://support.microsoft.com/kb/249873/en
not enough privelegies to register DLL-component of VCC+

作者: qqopp123    时间: 2015/1/10 20:20

AlexVox 发表于 2015/1/10 17:43
you have to install update for your Windows: VCC+ 2012 (x86) update 4, choose english version and t ...

Thank you... I have a look ok....
作者: AlexVox    时间: 2015/1/11 05:43

Vocalistener for V4-editor (unofficial)
https://mega.co.nz/#!Q0ckVAQB!zV ... V8wZDljNeE04ComqLNM
https://yadi.sk/d/Q_piPKXVdtQHR
old one doesn't work if V3-editor isn't installed.
Yamaha made no update on Vocalistener to make it fully compatible with V4
作者: scskarsper    时间: 2015/1/12 09:05

'Huum...did you try hook some dll to unlock the limit? I try to hook dbm4 and rebuild GLOW success,I edit this dll in winhex and changed dll exporter name to dbmt and then make & link a new dll to hook it and replace original dbm4,and try to find data in “extradb” if it cannot find data in orignal db,I it worked.but a big bug is...a lot of db halt,and some render times halt ≥﹏≤,but I think this is a right way
作者: AlexVox    时间: 2015/1/12 13:12

本帖最后由 AlexVox 于 2015/1/12 15:26 编辑
scskarsper 发表于 2015/1/12 05:05
'Huum...did you try hook some dll to unlock the limit? I try to hook dbm4 and rebuild GLOW success, ...

this is not the right way, GROWL need some special data (recorded in V4-voices), without that data V4 will work unstable
same thing with trying to unlock XP\Vista-run, it works but crashes on many actions (should i call it "unlock"? no, because it can't work properly)
unstable = doesn't work, + so called "unlock" GROWL just for ability to turn it on - is not unlock either, GROWL should work as technology developed for, if you can turn on growl and get no appropriate and stable changes in voice - it doesn't make sense.
unlock is not the target, it makes no sense if GROWL doesn't work as with V4-vocaloids (or as it should work), target is stable and proper functioning
作者: qqopp123    时间: 2015/1/16 23:12

This vocaloid4 can be automatically updated?
作者: AlexVox    时间: 2015/1/17 01:33

qqopp123 发表于 2015/1/16 19:12
This vocaloid4 can be automatically updated?

No
i recommend to turn off this function via preferences, you can't update cracked version to another (newer) cracked version via official update
作者: 百鬼恭乙    时间: 2015/2/6 22:12

不能在XP上用好难过/_>\本来很看中Growl这个参数的……
作者: shizika    时间: 2015/2/7 19:50

thank you!!!!!!!!!!!!!!!!!!!!!!!!!!!
作者: iYang1996    时间: 2015/7/4 09:41

本帖最后由 iYang1996 于 2015/7/4 09:48 编辑

I'm new here. I want to know that it supports the Chinese display?
作者: nlpss92055    时间: 2015/8/18 18:58

檔案已掛了~




欢迎光临 iVocaloid论坛 (http://bbs.ivocaloid.com/) Powered by Discuz! X2