Vocaloid4FE 4.0.1

The new engine allows the importation of Vocaloid 2 and Vocaloid 3 vocals, though Vocaloid 2 vocals must have already been imported into Vocaloid 3 for this to work. The new engine includes other features, but not all of them are accessible by Vocaloid 2 and Vocaloid 3 vocals. One of the new features is a "Growl" feature which allows vocals built for Vocaloid 4 to take on a growl-like property in their singing results. Cross-synthesis was also added, allowing the user to switch between two of a character's vocals built for the same language smoothly using a time-varying parameter. This feature is accessible by Vocaloid 3 and Vocaloid 4 vocals, but not Vocaloid 2. Another feature included is Pitch Rendering, which all imported vocals can use. This displays the effective pitch curve on the user interface. Finally, real-time input has been included in this version and is another feature which all vocals can use. VSQX files made for Vocaloid 3 work in Vocaloid 4

*supported language interfaces: english, japanese, korean, spanish, chinese, italian, french, russian, portuguese(Brasil), tagalog (philipino), vietnamese, Indonesian, malaysian.

*over 100 job-plugins from Vocaloidstore and some user-made plugins, you can find them in Vocaloid\Job Plugins folder after installation

don't forget to read readme.txt for other information

https://mega.co.nz/#!4sFCkS7b!9DevgQgdJgOjgbXHlkIDPVde6Ji4ol2z-rdqy7wUxZs
https://www.oboom.com/QQC6MFTA

檔案已掛了~

I'm new here. I want to know that it supports the Chinese display?

thank you!!!!!!!!!!!!!!!!!!!!!!!!!!!

不能在XP上用好难过/_>\本来很看中Growl这个参数的……

qqopp123 发表于 2015/1/16 19:12
This vocaloid4 can be automatically updated?

No
i recommend to turn off this function via preferences, you can't update cracked version to another (newer) cracked version via official update

This vocaloid4 can be automatically updated?

scskarsper 发表于 2015/1/12 05:05
'Huum...did you try hook some dll to unlock the limit? I try to hook dbm4 and rebuild GLOW success， ...

this is not the right way, GROWL need some special data (recorded in V4-voices), without that data V4 will work unstable
same thing with trying to unlock XP\Vista-run, it works but crashes on many actions (should i call it "unlock"? no, because it can't work properly)
unstable = doesn't work, + so called "unlock" GROWL just for ability to turn it on - is not unlock either, GROWL should work as technology developed for, if you can turn on growl and get no appropriate and stable changes in voice - it doesn't make sense.
unlock is not the target, it makes no sense if GROWL doesn't work as with V4-vocaloids (or as it should work), target is stable and proper functioning

'Huum...did you try hook some dll to unlock the limit? I try to hook dbm4 and rebuild GLOW success，I edit this dll in winhex and changed dll exporter name to dbmt and then make & link a new dll to hook it and replace original dbm4，and try to find data in “extradb” if it cannot find data in orignal db，I it worked.but a big bug is...a lot of db halt，and some render times halt ≥﹏≤，but I think this is a right way

Vocalistener for V4-editor (unofficial)
https://mega.co.nz/#!Q0ckVAQB!zV ... V8wZDljNeE04ComqLNM
https://yadi.sk/d/Q_piPKXVdtQHR
old one doesn't work if V3-editor isn't installed.
Yamaha made no update on Vocalistener to make it fully compatible with V4

AlexVox 发表于 2015/1/10 17:43
you have to install update for your Windows: VCC+ 2012 (x86) update 4, choose english version and t ...

Thank you... I have a look ok....

qqopp123 发表于 2015/1/10 12:42
After installing the could not start because the DLL files of the dynamic link library what problem. ...

you have to install update for your Windows: VCC+ 2012 (x86) update 4, choose english version and then x86-version
http://www.microsoft.com/en-US/download/details.aspx?id=30679
also you can find that package in folder where you have Vocaloid4FE installed (file vcredist_x86.exe) and launch it

also to good to find ultimate packs for all VCC's x86 (includes 2008, 2010,2012,2013)

V4 works with VCC+ 2012 update 4 (microsoft-link above), i have notebook with only VCC+ 2012 update 4 installed and V4 works fine (original or FE, no matter, they using same VCC DLL's)

also VCC+ 2008 SP1 needed for some components like Vocalistener, Vocaloid.NET, etc (though V4 can run without vcc 2008)

you if still have problems: uninstall Editor and ALL VCC+ 2012-components from your PC, make restart, then install VCC+ 2012 x86 and VCC+ 2008 SP1 x86, then install Editor. Same problems sometimes happens with V3 too, just with another message ("The application has failed to start because its side-by-side configuration is incorrect. Please see the application event log or use the command-line sxstrace.exe tool for more detail.")

different versions of "VCC+ 2012" can interfere with each other, so it's better to have only one VCC+ 2012_x86 being installed
http://www.microsoft.com/en-US/download/details.aspx?id=30679

if you have few "VCC+ 2012" or few "VCC+ 2008" into your system - it could be the problem for some applications, you better to leave one VCC+ 2012 and one VCC+ 2008 in your system

also it could be the problem with windows component regsvr32
http://support.microsoft.com/kb/249873/zh-cn http://support.microsoft.com/kb/249873/en
not enough privelegies to register DLL-component of VCC+

After installing the could not start because the DLL files of the dynamic link library what problem...... This can be solved?
well...

The beginning is the deletion of msvcr110.dll, I went online to find the file on the c:/windows/system32, and then the......

Try the online said registered with the Regsvr32, is this......

Http://tieba.baidu.com/p/3511280526 then this post....

qqopp123 发表于 2015/1/7 16:39
Vocaloid3 source how to import the vocaloid4 need not to need to get some what?

V4FE have support for old V3FE/AE -packages, just install and use them

Vocaloid3 source how to import the vocaloid4 need not to need to get some what?

meimeixue 发表于 2015/1/7 15:40
Can it run on xp after updates？

no, Vocaloid4 works only with Win7 or 8
http://www.vocaloid.com/vocaloid4/

if you have Xp\Vista - use V3FE 3.2.1.0

Can it run on xp after updates？

I knew you'd break.. Thank you

some updates on installer:
few language interface translations updated (chinese too)
fixed issue: pdf-manual didn't show up while opening via Vocaloid4-editor
fixed issue: deleting X-SYNTH data for V4-vocaloids during re-installation of editor
added quite installation for both: "Visual C++ 2008 SP1 (x86)" and "Visual C++ 2012 (x86)" while installing editor
added shortcut to pdf-manual into W-Programms-Vocaloid4FE section
avast false alarm fixed during installation process

https://mega.co.nz/#!4sFCkS7b!9DevgQgdJgOjgbXHlkIDPVde6Ji4ol2z-rdqy7wUxZs
https://www.oboom.com/QQC6MFTA

AlexVox 发表于 2015/1/4 15:09
cross synth works only between appends of same voice
http://www.vocaloid.com/application/function/ ...

Thank you very much

thank you very much。It is Very beautiful~~
win8.1~飘过~~~~~华丽丽....

AlexVox 发表于 2015/1/4 04:00
specially for you: download this exe
https://yadi.sk/d/ed3QfwOOdmVrQ
or https://mega.co.nz/#!RhlAw ...

Thanks very much.

lazydog 发表于 2015/1/4 08:26
Thank you for cracking V4 again.
BTW,could you please unlock "growl" feature?I remember that some pr ...

growl feature supported only by V4-vocaloids, because growl needs ADDITIONAL voice data from library, and only V4-libraries have it, so it's impossible to unlock it for V3's
growl with V3's can be used with some VST-plugins, not with native feature of V4-editor

aasa 发表于 2015/1/4 09:05
Thanks.But can you tell me why the cross synth can't work for many other V3 library?

cross synth works only between appends of same voice
http://www.vocaloid.com/application/function/cross_s.html
it's Yamaha's liimitation

Thanks.But can you tell me why the cross synth can't work for many other V3 library?

Thank you for cracking V4 again.
BTW,could you please unlock "growl" feature?I remember that some producter used "growl" to make their songs again,but they used V3 library!I don't think YAMAHA gave them the new version of library.