How to clean Figures?

Yesterday, I recieved the figure I bought from Taobao. But as soon as I recieved it, I found that it covered with some unknown dirty. I printed screen and sent it to the shop assistant. He was surprised to see it too.

He said, it should be robbed during the express travelling. But this kind of dirty is not like pen's ink. It is very hard to clean. For PVC, you cannot use acid or alcohol to clean it because you will probably damage it. The shop assistant said it could be cleaned by hot water. Then I prepared a bowl of boiled water and dismissed the figure.

After immersed for a while, I cleaned the dirty parts one by one. I robbed on the dirty parts and the dirty was disappeared little by little.

Before the water became cooler, I had already cleaned it. Then I picked up all the parts and finished it.

By the way. If the dirty you see is only dust, just put it in the water for a while and pick up it.

那么我无可奈何了

Lasty told me that she always puts figures in hot water to fix their structure in order to complete them easier.

用贼婆油试试.不行就用郡士蓝标溶剂小心擦(慎用)

Christie, you will probably damaged it if you use that kind of liquid to clean PVC figures.

所以我后面标了慎用.用洗洁精水泡吧.至少这个我试过.泡了一个多星期都没事.

I wonder what is it looked like now? Please print screen to show me.

漆层完好无损...本来是想洗掉自己上的...结果不但没掉更清楚了...(可能是山寨东西用的漆有关)

没有手办的飘过~不过相信以后会用的上的~！顺便问问~！高达零件也能这样洗么？干脆直接扔进水里，叫他游泳算了~~！

It's OK. But be careful. If you paste the parts, please wait until the glue is dried.

直接用毛巾蘸着擦就好了...我那泡的是把桩都拆了...

看到贼婆油和君士蓝标倍感亲切……
虽然这两个我都不用……

Well. It's true that I should keep it in a secret place. Only photos that my friends consider me as "pervert". (Note: pervert means Hentai)

若是咱可能就用拭镜纸处理了--------------

那么么本公主事了吧...

估计这贴也快没什么事了--------------

那么就只剩歪楼一条路了~

还是沉了吧..

在水民版聊帝进驻之前还是安全滴...

嗯嗯~还是安全的~！（跟着miko附和着~！

那么谁敢造次= =

你一嚷嚷~~！大家都不敢了啦~！！

群众表示公主说过歪楼才是水区的正统

我也问下，我的黑saber放屋子里3.4年了快，一直没给配个框子，最近想擦干净然后配个框，怎么弄比较好啊

如图右下角，不太会照相，可能不是太清晰

我是来不让灰羽冷场的...

无脑提问不做回答.自己往前看